Multi-Protection 3-12W Adjustable Self-Test 0uA Standby LED Panic light ballast powerpack Emergency Driver for External Battery Lighting System
Features:
1. Multiple safety protection
Over-charging/over-discharging/over-loading/short-circuit protection
Comply with CE/RoHS international certification standards
Fireproof material shell, IP20 protection level
2. Intelligent energy-saving design
0uA standby power failure, zero static power consumption.
Self-test function supports monthly/yearly automatic test
3W-12W adjustable power, adaptable to different lamps and lanterns needs
3. Flexible and compatible configuration
Support Li-ion/Li-FeP04/Ni-CD batteries.
Emergency endurance 1-3 hours can be customised
Adapt to external LED driver, ready to install and use
Key advantages:
1. Comprehensive Safety Guarantee
Quadruple circuit protection
Fireproof shell + IP20 protection, adapt to harsh environments
CE/RoHS certified, in line with international safety standards
2. High efficiency and energy saving
0uA power-off standby, completely eliminating ineffective energy consumption.
Intelligent self-test (monthly/annual/quarterly), reducing maintenance costs
3W-12W adjustable output, accurately matching the needs of the lamps and lanterns
3. Flexible Compatibility and Adaptation
Support Li-ion/Li-FeP04/Ni-CD multi-type batteries.
Emergency time 1-3 hours can be customised to meet diversified scenarios.
Plug-and-play design, adaptable to external LED driver system.
| Input voltage |
100-277VAC 50/60Hz |
| Input current |
100mA max. |
| Charging power |
5.0W max. |
| Power factor |
>0.5 |
| Charging current |
0-350mA |
| Charging time |
≥24 Hours |
| Charging mode |
Trickle charging |
| Emergency output Voltage |
DC20-85V, DC90V Max. |
| Emergency output Current |
Adjust the current according to the DC voltage of the LED lamp board |
| Emergency power |
5W/8W |
| Emergency time |
3H/1.5H |
| Battery capacity |
2600mAh-7.4V/2000mAh-7.4V |
| Case temperature |
tc 70°C Max. |
LED and Test Button Status
Green indicator light - the battery is fully charged and lights up in green.
Red indicator light-battery charging, when the battery is charged to 85%, the red light turns off and the green light turns on,
and the battery continues to be charged with a trickle until it is fully charged.
Alternately flashing red and green lights - battery failure or battery not present.
Test button
There is mains power,
press the test button once, it will switch to
emergency, and after 3-4 seconds, it will turn to
the charging state of mains power
When the emergency power supply is connected to
electricity grid under stable condition, MCU detects that there
is power on, and the timer starts counting. Self detection is
performed every 90 days. The self dection method is: when the
MCU detects that there is mains power for 90 days, the system
will automatically cut off the mains power, light will be operating by
battery, the duration is the emergency time required by the customer.
After the battery is used to supply lamps, the system will automatically
switch back to electricity grid supply for lamps and then charge the emergency power supply.
When the emergency power supply is
connected to electricity grid under stable condition,
MCU detects that there is power on, and the timer starts
to count. If there is mains power cut off in the middle,
the timer will not retain the original time, and the timer will start
to time from the next detection that there is mains power,
and the timer will perform self detection once every 90 days. and so on
Installation and Notifications
. Install by licenced electrician, must be under power off electricity stage, Live line.
. Working is prohibited, according to avoid accidental clause.
. Light's driver: "L" and Emergency driver "L" must be same phase.
. Under emergency stage, other than lighting lamp, all will be off.
. Emergency driver working temp. is -10 to 55ºC, avoid to working over or under this range for
battery lifespan consideration
. Emergency driver testing must be longer than 1min, don't press the testing button frequently.
. Emergency driver has self-detect function, will be discharge and charge per 3 month since
electicity supply connected, according to enlonger the lifespan of battery, must have
maintenance by experienced electrician regularly.
1. Commercial public places
Shopping malls/supermarkets power failure emergency lighting, to protect the evacuation safety
Hospital/school corridor emergency power supply, maintain basic lighting
Hotel/office building safety exit indication system power supply
2. Industrial warehouse environment
Provide continuous light source in case of sudden power failure in factory workshop
Warehouse racking area emergency lighting to avoid operation interruption
Backup power supply for equipment maintenance in power distribution rooms
3. transport infrastructure
Underground platform/tunnel emergency lighting system core drive
Underground car park automatically switch light source after power failure
Power supply for emergency access lights in airport terminals
4. Public recreational venues
Stadium / theatre sudden power outage start backup lighting
Museum/exhibition hall cultural relics area security emergency power supply
Library reading area uninterrupted low-power light source support
5. Special emergency scenarios
Long-term standby power supply for disaster prevention shelters
Laboratory precision equipment sudden power failure protection
Outdoor billboard emergency lighting system drive
Company Profile
FAQ
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
Audited Supplier 
){kind=link}