Factory Price Panic Light Ballast Power Sentry LED Emergency Driver for Tri-Proof Light Down Light Ceiling Light High-Bay Light Panel Light Wallpack

Product Description

Factory price Panic light ballast power sentry led emergency driver for tri-proof light down light ceiling light high-bay light panel light wallpack

1.self-detect
2.constant power emergency output
3.apply to constant current driver external lighting products
4.LiFePO4 using together
5.battery:over-charge/discharge protection and short circuit protection
6.working environment: temp.: 0 to 60'C
7.lP65 standard
8.not suitable for high risk lighting environment
9.Accessories:integrated waterproof button and indicator light, remote control
10.3 years warranty

 

Specifications

Item number	MF-188G-EM30A
Input Voltage	100-277VAC,50/60Hz
Input Current	100mA max
Emergency Power	5W
Battery Type	Li-ion or Li-FeP04
Environment Temp.	tc 60ºC Max
Warranty	3 Years
Meas.	L200*W80*H80mm
Power factor	≥0.5
IP Rating	IP 65

Wiring Diagram

 

Product Parameters

1.Have authorized CE certificate

2.With infra red wireless remote control

3.Constant power output

4.High voltage output

5.Charging and dis-charging protection function

6.and over heat temp. protection

7.Mock-up electricity pause emergency testing function

8.Can be power off under emergency status

9.Indication light: city grid electricity

10.Seasonal self detect function

11.Protection functions: over voltage, short circuit, over

12.load and open circuit

13.Metallic housing, comply EMC, FCC and C-tick ordinances

14.IP grade: IP65

Application

1.Commercial Spaces (Malls/Office Buildings)

Used for emergency evacuation and decorative lighting, supports smart sensor integration, complies with EN 60598-2-22 standards, and maintains consistent color temperature during backup mode.

2.Industrial Explosion-Proof Environments (Oil/Chemical Plants)

Features intrinsically safe circuits and wide-temperature batteries, meeting IECEx/ATEX explosion-proof certifications for Zone 1/2 hazardous areas.

3.Residential/Public Facilities (Stairwells, Corridors)

Equipped with motion/audio sensors for automatic activation during power outages, providing 90+ minutes of backup lighting for safe evacuation.

4.Medical Facilities (Hospitals/Labs)

Ensures uninterrupted lighting in operating rooms and emergency zones with zero delay switching, meeting medical-grade EMC immunity requirements.

5.Outdoor/Tunnel Lighting

High ingress protection (IP66/IP67) with weather-resistant design, maintaining guidance lighting during emergencies.

LED and test button status:

LED INDICATOR

Green breathing pattern:charging mode
 

Green stable: battery fully charged
 

Red flashing: failure as below

Red flashing Once per second: Battery is not connected

Battery is defective

Red flashing four times a second :Load failure during emergency mode,

open circuit/short circuit
 

Green flashing: Emergency status one per second

Remote Control

1:0S<Key ON ≤1S,Enter a simulated state of emergency,the green indicator blinks once every second

 

2:0S<Key OFF ≤1S,In simulated emergency situations, return to the normal charging state

3:0S<Key OFF ≤1S,In the emergency state, the emergency state is turned off.

QUARTERLY SELF-TEST

when emergency driver is on power,every 180 days± 1 day automatically enter the emergency state,emergency duration until the battery is discharged,then return to power-on status.

Installation Instructions

1:If it is used for the first time or it does not enter the normal working state after being over-discharged, it is necessary to connect the main power

to activate the emergency power supply and charge it for 24 hours. Please use the original emergency battery provided

2:When installing and using it, please keep it away from heat sources and only use it within a certain working temperature range.

3:Should be stored in a cool, dry environment.
4:After prolonged storage, recharge at least once every 6 months as needed.
5:Emergency driver testing must be longer than 1min, don't press the testing button frequently.

Company Profile

FAQ

Q1: Are you a factory or a trading company? Where is your company located?
A1: We are 100% a factory, not a trading company. Our company is located in Dongguan, between Shenzhen and Hongkong Guangzhou, China.
Q2. How about the lead time of LED Linear High Bay Light ?
A2: 3-7 days for sample order, 15-25 days for mass production order base on order quantities.
Q3. Can I have a sample order for LED Tri-proof Light  ?
A3: Yes, sample order to test and check quality is welcomed. Mixed samples are acceptable.
Q4: How do you ship the finished production ?
A4:By SEA, AIR or Express(DHL,UPS,Fedex,TNT,etc) are optional.