Factory Price IP20 Panic Light Ballast Emergency Ballast Interter Emergency Light Kit LED Emergency Driver for Triproof Light Down Light Ceiling Light

• Customization: Available
• Certification: CE, RoHS, MSDS
• Warranty: 3 Years
• Model NO.: MF-188X
• Input Voltage: 220-240VAC 50/60Hz
• Input Current: 0.003A Max.@230VAC
• Input Wattage: <5.0W
• Battery Charging Current: 350mA Max.
• Battery Charging Time: ≤24h Max
• Storage Temperature: -20-40ºC
• Electric Strength: 3000VAC 5mA (Input to Output)
• IP Rating: IP 20
• Maximum Shell Temperature: 75ºC
• Relevant Standard: IEC 61347-2-7/IEC 61347-1/En55015
• Power Factor: ≥0.5 @230 VAC
• Emergency Output Voltage: DC25-185V,200VDC
• Emergency Power: 3W
• Emergency Time: 3h
• Battery Data: Lifep04 4.0ah 3.2V
• Specification: 115*38*24mm
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 5, 000PCS/Month

Product Description

Factory Price IP20 Panic Light Ballast Emergency Ballast Interter Emergency Light Kit LED Emergency Driver for Triproof Light Down Light Ceiling Light 
 

Product Description

The MF-188X LED Emergency Driver is a compact (115×85×28mm) Li-FePO4-compatible solution delivering 3W/3H emergency power with zero standby current. Featuring multi-protection (overcharge/discharge/short-circuit), it offers visual diagnostics via LED indicators and supports manual testing plus automatic 180-day self-test cycles. The IP20-rated unit operates up to 75ºC, meets IEC/EN standards, and requires 24-hour initial charging with 6-month maintenance recharges. Backed by a 3-year warranty, this energy-efficient driver (<5W input) ensures reliable emergency lighting with its 4000mAh battery capacity and robust 3000V electric strength protection. (400 characters)


Smart Protection:
Overcharge/discharge, overload, and short-circuit safeguards
Zero Standby Drain:
0μA static current when powered off
Advanced Diagnostics:
LED indicators for charging (green), faults (red flashing), and emergency status
Flexible Testing:
Manual emergency simulation (10s), auto semi-annual self-test (180-day cycle)
Robust Design:
IP20 rated, 75ºC tolerance, compliant with IEC/EN standards
Usage:
Requires 24h initial charge, 6-month storage recharge, and >1min test duration. 3-year warranty.

descriptions:

self-detect
constant power emergency output
Suits for LED fitting with external LED driver
External battery, Li-ion/Li-FePO4/Ni-CD
With multi-protection function;
battery overcharge protection;
battery over-discharge protection;
output overload protection;
short-circuit protection.
Accessary test switch and LED indicator
In the state of the power off, to connect with the battery, static current at the battery terminal is 0uA

Input voltage	220-240Vac, 50/60Hz
Input current	0.003A Max. @230Vac
Input wattage	<5.0W
Power factor	≥0.5 @230 Vac
Battery charging	350mA Max.
Battery charging time	≤24Max
Emergency output Voltage	DC25-185VMax.200VDC
Emergency power	3W
Emergency time	3H
Battery	Li-FePO4/26650/4000mAh-3.2V
Storage Temperature	-20-40ºC
Electric Strength	3000Vac, 5mA (input to output)
IP Rating	IP 20
Maximum shell temperature	75ºC
Warranty	3 Years
Relevant standard	IEC 61347-2-7 / IEC 61347-1 / EN55015

  

Wiring Diagram

• AC Input: Brown (Line) and Blue (Neutral) wires for 220-240V power supply

• LED Connection: Red (positive) and Black (negative) terminals for LED output

• Battery: Dedicated charging wires (color not specified) for Li-FePO4 battery connection

• Switch Control: Includes wall switch integration

• Wire Specs: Uses 0.5-1.5mm² cables with 7-8mm stripping length

Measure

LED and test button status

LED INDICATOR
Green breathing pattern: charging mode
Green stable: battery fully charged
Red flashing: failure as below
Red flashing Once per second: Battery is not connected
Battery is defective
Red flashing four times a second: Load failure during emergency mode, open circuit/short circuit
TEST BUTTON
1: 0S<Key≤2S, Enter a simulated state of emergency, the green indicator blinks once every second, keep emergency status for 10±1 seconds and back to normal status
2: In simulated emergency situations, Short press once to exit and return to the normal charging state
3: 0S<Key≤1S. In the emergency state, the emergency state is turned off.
QUARTERLY SELF-TEST
when emergency driver is on power, every 180 days±1 day automatically enter the emergency state, emergency duration until the battery is discharged, then return to power-on status.

LED indicator

Mounting hole 6.5mm dia

Test switch

Mounting hole 7mm dia

Installation Instructions

1: If it is used for the first time or it does not enter the normal working state after being over-discharged, it is necessary to connect the main power
to activate the emergency power supply and charge it for 24 hours. Please use the original emergency battery provided
2: When installing and using it, please keep it away from heat sources and only use
it within a certain working temperature range.
3: Should be stored in a cool, dry environment.
4: After prolonged storage, recharge at least once every 6 months as needed.
5: Emergency driver testing must be longer than 1min, don't press the testing button frequently.

 

Application

Application:
school,hospital,subway,train station,shoppingmall,supermarket,airport,office, factory,hotel,basement,parking lot,public place

Packaging & Shipping

 

Product Line

FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED  Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED  Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.