Factory Price Anti-Glare Rotable Creative 140lm/W Ra>97 IP65 Waterproof Magnetic Contour Gallery Museum Canteen LED Track Light

Product Description

Factory Price 37W 2700K/3000K/4000K Black/White Beam Angle 20° ~36° Ra>97 5 Years Warranty Shapable Track Light for Gallery

Product Description

GZ series shapeable track light features a compact design, with dry mechanical damping system. It achieves stable and reliable front and rear zoom, spot shaping and projection, ultra-high cost performance, very suitable for the current new commercial lighting design and no main lamp design. Its photoelectric performance is the same as DQ Series.

Track Support

 

DIP color temperature coupled with the single lamp knob dimming design can easily achieve single lamp dimming, spot shaping and color temperature adjustment. It can be used alone or can alternatively be equipped with other dimming devices.

2700K

4000K

6000K

Control support

Support 1-10V. DMX, DALI, ZGEBI, and other mainstream control. Can also be connected with Huawei, Tuya, Xiaomi,  Elf, Amazon, Google, and other smart AI control systems.
 

 

Instruction Manual

Adjust the aperture to the appropriate size, and facing the center of the irradiated object, adjust the sharpness to a reasonable degree, as shown in Figure 17.

Pull the four diaphragm sheets outward to the maximum, and then push one by one vertically inward, to ensure that the cut square spot is smaller than the object to be illuminated, and adjust the sharpness of the aperture again until satisfactory, as shown in Figure 18.

If the shape of the spot does not match the object to be illuminated, first loosen the hand screw at the red mark, rotate the blue part of the lens, adjust the edge of the spot to be parallel to the edge of the object to be illuminated, and finally tighten the hand screw. As shown in Figure 19, the LOGO projection direction not matching can also be adjusted to the ideal direction using this method.

Stretch the diaphragm sheet one by one outward  until the spot size is substantially consistent with the object, as shown in Figure 20. If you are not satisfied with the effect, it is recommended to repeat the operation according to the above steps to bring up the spot effect you are happy with.

 

Important Notes

1. When replacing the projector, be sure to pull all four diaphragm sheets outward to the maximum extent and then load the projection device. Otherwise, it may damage the lens parts, affecting the spot shaping effect.

2. Do not remove the rest of the lens except for replacing the projection unit and routine lens maintenance. If the lens cannot be used normally due to manual disassembly, the company does not provide maintenance and warranty services.

3. Track-type shapeable track light is generally heavier than ordinary track lights. Please determine whether the installation conditions are allowed before installation.

4. The lens does not contain any repair accessories. Please do not disassemble the lens without permission. Unauthorized disassembly will not be repaired or returned.

  
 

Application

Packaging & Shipping

 

Company Profile

 

FAQ:

Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED  Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED  Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.