240km/H Wind Speed DC12V-48V AC110 240V IP66 LED Aircraft Warning White Beacon Aeronautical Aviation Obstruction Obstacle Light for Wind Turbine Hangar Airport

Product Description

240km/H Wind Speed DC12V-48V AC110 240V IP66 LED Aircraft Warning White Beacon Aeronautical Aviation Obstruction Obstacle Light for Wind Turbine Hangar Airport 

Features

 

This LED Medium-intensity Type A L865 Aviation Obstruction Light flashing white color, designed for marking top of obstacle which height is between 105-150 meters. Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

1.High-intensity LED technology for bright illumination and long-distance visibility.
2.Available in various colors (such as red, white, or a combination) based on application and regulatory requirements.
3.Advanced light control systems, including photocells or timers, for automatic activation during low visibility or nighttime conditions.
4.Durable and weather-resistant construction to withstand harsh environmental conditions.
5.Self-diagnostic features to detect and report operational issues for reliable functioning.
6.Essential for alerting pilots and aircraft personnel to the presence of tall structures or obstacles.
7.Enhance aviation safety by minimizing the risk of collisions and ensuring air navigation safety. Vital component of aviation infrastructure worldwide.

 
Electrical
1.CR-EE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp
2.Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical

1.Unique design and UV protected polycarbonate reflector for converging light
2.UV protection Powder coated bright yellow color base make better visibility
3.Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
4.Pressure equalizing valve installed under the base to make sure the air could go through but water is avoid, so that the whole light temperature won't be high to avoid the moist air enter due to pressure and temperature difference

System design

1.Built-in photocell for day/night operation(dusk to dawn operation)
2.Surge and lightning protection
Optional

1.Dry contact Alarm output for remote monitoring
2.GPS synchronization
3.Infrared LED for pilot using NVG
 

Light Source	CREE high intensity LED
Available Colors	White
Intensity(cd)	≥20,000cd (Daytime)/≥2,000cd(Night)
Horizontal Output(degrees)	360
Vertical Divergence(degrees)	3
Flash Characteristics	20-60 flashes per minute(factory setting: 20fpm)
Operation Mode	24hours operation, 2 different modes
LED Life Experience(hours)	>100,000

Specifications

 

Electrical Characteristics
Lightning surge	IEC61000-4-5 L- N ±3kV
	IEC61000-4-5 L- PE ±6kV
	IEC61000-4-5 N- PE ±6kV
Electrostatic	IEC61000-4-2 Contact discharge 8kV
Environmental Factors
Ambient Temperature(ºC)	-40ºC~55ºC
Storage temperature(ºC)	-55ºC~70ºC
Humidity	10%-95%RH(No condensation)
Compliance
ICAO	Annex 14 Volume 1, 'Aerodrome Design and Operations' Seventh edition 2016, table 6.3 Medium-intensity Type A White Obstacle Light
FAA	L-865
Options Available	NVG(Night Vision Goggles) compatible LED
	Bird deterrent spike
	GPS sync flashing
	RS485 communication
	Flashing rate

Configuration

 

Model	Power input	Flash rate	Photocell	Dry contact Alarm	GPSsync flashing	Control
MF-MI-A2	110-240Vac&48Vdc 12VDC 24VDC 36VDC	Steady 20FPM 30FPM 60FPM 40FPM	Built-in Photocell No Photocell	No Alarm Alarm	No SYNC GPS SNYC	Used alone Used with controller

Dimension

Installation

 (Mounting bracket is charged separately, and size is customized)

Wiring diagram

 

Applications

• MF-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 105-150 meters, and most time work with low intensity lights & medium intensity type B light installed on the lower place.
  
  1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
  2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
  3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
  4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
  5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
  6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
  7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
  8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
  9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
  10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst
  

  Production&Testing

   

  

  
  
  
  

FAQ:

1. Are you a manufacturer?
   Absolutely, we are a professional manufacturer with 16 years of experience.
   Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.

2. What is your main product?
   Our main products are as follows:
   LED Triproof lights/ LED Vapor Tight Lights
   LED High Bay Lights
   LED Flood lgihts
   LED Explosion Proof Lights
   LED Down Lights
   LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
   LED garden spot/spike lights
   LED inground lights

3. What is the minimum order quantity (MOQ)?
   For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.

4. What are the payment options?
   We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP

5. What is the delivery time?
   The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.

6. How are the products packaged?
   Each piece is packed in an individual color box and then placed in a strong master carton.

7. Why should you choose us?
   1). We offer OEM/ODM services.
   2). We have our own design team.
   3). We offer high-quality products at reasonable prices.
   4). We have no MOQ request.
   5). Our sales team has 12 years of experience in underwater lighting.