Factory Price 10W 1-10V Dimming Shapeable 360° Rotation High Brightness 2700K-6000K LED Spot Track Light for Art Gallery

• Customization: Available
• Color Temperature: 2700K/3000K/4000K/5000K/5700K
• Lamp Body Material: Aluminum
• Model NO.: T1005AL
• Power: 8W/10W/20W/28W/37W
• Emitting Color: Changeable
• Wire: 4wires/3wires/2wires/6wires/Mono/Other
• IP Rating: IP54
• Certification: CCC, CE, CQC, RoHS
• Input Voltage: 220-240V
• LED Chips Brand: Osram
• Beam Angle (Lens): 25-45°/20-35°/20-36°/15-25°
• CRI: >97
• Color of Housing: Black White
• Warranty: 2 Years
• Specification: 1pcs/ctn
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 5, 000PCS/Month

Product Description

Factory Price 10W 1-10V Dimming Shapeable 360° Rotation High Brightness 2700K-6000K LED Spot Track Light For Art Gallery

Product Description

Fully independent intellectual property rights, global patents, global certification!
Dry stepless linear zooming and spot shaping. Frame size 1:0.8

There can never be only one lighting design solution. The possibilities in the design are limitless. Moreover, the spirit of the times, cultural background, abstract concepts, and even the personal characteristics of the designer can be different and diverse. We look for the most suitable way of light expression in this infinite possibility.

 

Product Name:	T1005AL
Item Type:	Shapeable Track Light/Led Track Light/Led Spot Light
Wattage:	30W
LuminousFlu:	900-950LM
Support filters	58
Input voltage:	220-240V
Light Source:	Os-ram
CRI (Ra>):	97
Housing colour:	white,black
Installation	Track-Mounted,Wall-Mounted
Working Time:	50000 hours
Warranty:	5 years

Industrial Grade Optical Filter
It can match a variety of industrial-grade optical filters and support the customization of special narrowband and ultra narrowband optical filters. Some filter functions can be superimposed, such as HD UV+color filter, HD UV+soft filter, amongst others.
Color filter : The luminous color of the lamp can be adjusted according to your needs.
ND filter: With electronic dimming, the small-angle illumination can be reduced to less than 75LUX, which is generally used for authentic lighting.
UV filter: It can effectively filter UV rays in LED lamps and lanterns, thus protecting the illuminated object. It delivers superior performance in silk products lighting and cultural relics lighting.
CPL filter: It can eliminate the reflection of the object's surface so that the object in a high luminosity environment can also display its original appearance.
GND filter: GND filter are used to alter the light ratio into the lens. For example, in illuminating the oblique side of the square position of the object, the use of gradient filters allows the even and constant illumination of the object.

360° manual rotation design
Loosen the manual screw and turn the lens to achieve the 360°spot rotation adjustment function. Device to solve the 360° rotation of the projection and light spot.

Optical-grade variable aperture design
An optical diaphragm made of high-precision special material with no blurring and freezing. Manual insertion and removal of the light cutting device can freely change the shape of the spot.

Multi-layer dry damping design
The invention is a focusing device not requiring the application of lubricating oil and has a silky feel. It is stable, reliable, wear-resistant, resistant to high temperatures, and does not wear off after extended use.

Track Support

 

DIP color temperature coupled with the single lamp knob dimming design can easily achieve single lamp dimming, spot shaping and color temperature adjustment. It can be used alone or can alternatively be equipped with other dimming devices.

2700K

4000K

6000K

Control support

Support 1-10V. DMX, DALI, ZGEBI, and other mainstream control. Can also be connected with Huawei, Tuya, Xiaomi, Tmall Elf, Amazon, Google, and other smart AI control systems.
 

 

Instruction Manual

Adjust the aperture to the appropriate size, and facing the center of the irradiated object, adjust the sharpness to a reasonable degree, as shown in Figure 17.

Pull the four diaphragm sheets outward to the maximum, and then push one by one vertically inward, to ensure that the cut square spot is smaller than the object to be illuminated, and adjust the sharpness of the aperture again until satisfactory, as shown in Figure 18.

If the shape of the spot does not match the object to be illuminated, first loosen the hand screw at the red mark, rotate the blue part of the lens, adjust the edge of the spot to be parallel to the edge of the object to be illuminated, and finally tighten the hand screw. As shown in Figure 19, the LOGO projection direction not matching can also be adjusted to the ideal direction using this method.

Stretch the diaphragm sheet one by one outward  until the spot size is substantially consistent with the object, as shown in Figure 20. If you are not satisfied with the effect, it is recommended to repeat the operation according to the above steps to bring up the spot effect you are happy with.

 

Important Notes

1. When replacing the projector, be sure to pull all four diaphragm sheets outward to the maximum extent and then load the projection device. Otherwise, it may damage the lens parts, affecting the spot shaping effect.

2. Do not remove the rest of the lens except for replacing the projection unit and routine lens maintenance. If the lens cannot be used normally due to manual disassembly, the company does not provide maintenance and warranty services.

3. Track-type shapeable track light is generally heavier than ordinary track lights. Please determine whether the installation conditions are allowed before installation.

4. The lens does not contain any repair accessories. Please do not disassemble the lens without permission. Unauthorized disassembly will not be repaired or returned.

  
 

Application

Packaging & Shipping

 

Certifications

Company Profile

 

FAQ:

Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED  Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED  Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.