Factory Price 24h Charge 10W Li-ion 1.5h Emergency CSA/UL924 Panic Light Ballast Powerpack LED Driver with 500 Cycles for Indoor Commercial Lighting

• Customization: Available
• Certification: CCC, ISO, CE, RoHS, FCC
• Warranty: 5 Years
• Model NO.: MF-KM-xxW-YYY-10W
• Input Voltage: 100-277VAC/347VAC 50/60Hz
• Input Current: 100mamax
• Input Power Rating: 7.0W Max
• Battery Charging Current: 250mA
• Output Current and Voltage: 20-55V/60-260VDC
• Recharge Time: 24hrs
• Discharge Time: 90 Minute
• Battery: Li-ion 3350mAh-7.4V
• Output Power: 10W
• Temperature Rating Ambient: Li-ion 0°c to 50°c (32°f to 104°f)
• Trademark: MF
• Origin: China
• HS Code: 9405499000
• Production Capacity: 50000pieces/Year

Product Description

Factory Price 24H Charge 10W Li-ion 1.5H Emergency CSA/UL924 Panic Light Ballast Powerpack LED Driver with 500 Cycles for Indoor Commercial Lighting

Features:

 1. Safety performance

Comply with CSA C22.2 NO.141, UL924 standard.

Battery has over-charge, over-discharge and short-circuit protection.

Comply with RoHS environmental requirements.

2. Stable operation

Li-ion battery capacity 3350mAh, voltage 7.4V, cycle 500 times.

Emergency time ≥ 1.5 hours, charging time ≥ 24 hours.

Charging current 250mA.

3. Convenient operation

Indicator light is always on (AC), slow flash (emergency), fast flash (fault).

Test switch: single press for 20 seconds for emergency, double press until the battery is discharged.

Connector can only be connected after installation is complete.

 

Key advantages:

 1. High compatibility and versatility

Support 100-277Vac/347Vac wide voltage input, suitable for many regions and scenes.

Wide range of output current and voltage, compatible with a variety of LED lamps.

5-year warranty, reducing the risk of long-term use.

2. Efficient charging and energy saving

Short charging time, charging current 250mA, quick recovery of emergency capacity.

Low power consumption design, AC input power is only 7.0W, energy efficient.

Battery capacity of 3350mAh, providing sufficient emergency time.

3. Intelligent monitoring and convenient operation

Indicator light and test switch combination, quickly determine the working status and faults.

Emergency mode can be manually switched off to avoid misuse.

All-in-one design, easy to install and reduce wiring complexity.

Specifications

Universal Input Voltage	100-277Vac/347Vac 50/60Hz
AC Input Current	100mA max.
AC Input Power Rating	7.0W max.
Battery Charging Current	250mA
Charging Time	≥24 Hours
Output Current and Voltage	20-55V/60-260VDC
Emergency Time	≥1.5H
Battery	Li-ion 3350mAh-7.4V
Output Power	10W
Full Warranty	5 Years
Temperature Rating Ambient	Li-ion 0°C to 50°C (32°F to 104°F)

Wiring Diagram

Dimension

When using electrical equipment, you should always follow basic safety precautions,

read and follow all safety instructions, including the following:

Risk of fire or electric shock.Luminaire wiring and electrical parts may be damaged when drilling for

installation of LED Emergency Backup Check for enclosed wiring and com . ponents.
 

Risk of fire or electric shock.This LED Emergency Backup installation requires knowledge of luminaire

electrical systems.If not qualified do not attempt installation. , Contact a qualified electrician.
 

Before installing make certain the AC power to the fixture is off.
 

The electrical rating of this product is 100-277Vac/347Vac.Installer must confirm that there is 100-277Vac/347Vac

to the fixture before installation.
 

To prevent electrical shock only mate unit connector after installation is complete and before the

AC power to the fixture is back on.
 

Do not use in outdoor.
 

This LED Emergency Backup unit requires an un switched AC power source of 100-347Vac 50/60Hz The

AC driver must be on the same branch circuit as the LED Emergency Backup unit
 

Do not let power supply cords touch hot surfaces.
 

Do not mount near gas or electric heaters.
 

Do not connect battery pack connector until all other wiring is complete and AC power is on
 

The emergency LED driver is for use with grounded,ULlisted LED luminaires,shall be enclosed by the LED

luminaire and bonded to the grounding of LED luminaire
 

Verify that all replacement lamp types marked on the installed luminaire are also identified as suitable for

use with this emergency battery pack.
 

Equipment should be mounted in locations and at heights where it is not be subjected to tampering by

unauthorized personnel.
 

The use of accessory equipment is not recommended by the manufacturer and may cause an unsafe

condition.

 

Application

1. Industrial facilities

Emergency lighting for factory floors and warehouses.

Backup lighting for control rooms and server areas.

Lighting for safety exits in manufacturing plants.


2. Educational institutions

Emergency lighting for university hallways and lecture halls.

Backup lighting for school computer labs and libraries.

Lighting for evacuation routes in school buildings.


3. Healthcare facilities

Emergency lighting for hospital corridors and patient rooms.

Backup lighting for medical equipment rooms and operating theaters.

Lighting for emergency exits in clinics and medical centers.


4. Public transportation hubs

Emergency lighting for subway stations and bus terminals.

Backup lighting for train platforms and control towers.

Lighting for evacuation routes in airports and seaports.


5. Residential buildings

Emergency lighting for apartment building stairwells and common areas.

Backup lighting for condominium lobbies and security rooms.

Lighting for fire escape routes in residential high-rises.

Packaging & Shipping

Company Profile

Certifications

FAQ

Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.

Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.

Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.

Q5: How long time to ship the goods if place an order?
A5:  Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.