Factory price Integrated internal Li battery 25W 30W 40Wemergency backup ballast emergency drivers for indoor andoutdoor lighting fixtures
1.UL Listed for us and canada
2.Listed to UL924 and tested to CSA C22.2 NO.141
3.Field or factory installation
4.High voltage output
5.Low energy consumption CEC compliance
6.Constant output power
7.Self-testing
8.Battery:over temperature protection
| Model NO. |
MF-EMUFO-xxW-170 |
| Input Voltage |
100~347Vac,50/60Hz |
| Input Current |
200mAmax. |
| Input Power Rating |
12W max. |
| Output Voltage |
170Vdc |
| Emergency Power |
25W/30W/40W |
| Recharge Time |
24Hrs |
| Discharge Time |
90 minute |
| Battery |
Li-ion |
| Warranty |
5 Years |
| Ambient Temp |
32~122 F(0....+50 ºC) |
| Weight |
5.10 lbs(2.2kg) |
CAUTION:
1.During AC operation, remember no touch or remove any wires in case of electric shock
2.During emergency operation, before touching and disconnecting the wires, remember to press the test button again to make the led lamp and indicator light off to avoid electric shock
3.The voltage input to the dimmable wires(DIM+,DIM-) of emergency LED driver must less than 20Vdc
4.For emergency LED driver of MF -EMUFO-25W-170 battery work with LED lamp not more than 150W,for MF -EMUFO-30W-170/MF -EMUFO-40W-170 must work with LED lamp less than 300W
1.Listed North America UL cert.
2.Comply UL924 ordinances, CSA C22.2 No.141
3.in-site assembly
4.With 0/1-10V dimming
5.With infra red wireless remote control
6.Constant power output
7.High voltage output
8.Comply emergency saving CEC ordinance
9.Charging and dis-charging protection function
10.and over heat temp. protection
11.Mock-up electricity pause emergency testing function
12.Can be power off under emergency status
13.Indication light: city grid electricity
14.Seasonal self detect function
15.Protection functions: over voltage, short circuit, over
16.load and open circuit
17.Metallic housing, comply EMC, FCC and C-tick ordinances
18.IP grade: IP40
| Model No. |
Output Voltage |
Emergency Power |
Battery Type |
| MF-EMUFO-25W-170 |
170Vdc |
25W |
Li-ion |
| MF-EMUFO-30W-170 |
30W |
Li-ion |
| MF-EMUFO-40W-170 |
40W |
Li-ion |
Indicator Light
1.AC Operation, indicator light will keep on
2.Emergency Operation, indicator light flash slowly (light on for 1 seconds, light off for 1 seconds)
3.In a failure, indicator light flash quickly (light on for 0.02 seconds,light off for 0.02 seconds
| Model |
Test Switch Operation |
Indicator Status |
Comment & Solutions |
| AC MODE |
Pressed the ON button on the remote |
0.5s ON andis OFF(slowflashing) |
The battery is under emergency test
Press OFF on the remote again to toggle the battery charge |
| EMERGENCY MODE (1) |
NO Pressed |
0.5s ON andis OFF(slowflashing) |
Battery is automatically conhucting a emergency until Battery is fully discharged |
| EMERGENCY MODE (2) |
Pressed the OFF button on the remote |
OFF |
Battery is turned off |
SELF-TEST
The emergency LED driver contains a control/monitor circuit which will perform 30-second discharge test once a month and a fully discharge test once a year. At this time, the unit simulate an AC power failure and automatically switch to emergency mode. During routine testing, the unit will monitor the operation of the LED load,battery voltage, and emergency duration, if the unit detect any problems, the indicator will fash quickly.
Commercial Office Buildings
Provides code-compliant emergency lighting for hallways, stairwells and exit routes during power outages. Maintains illumination for safe evacuation.
Healthcare Facilities
Critical backup lighting for hospitals and clinics where uninterrupted lighting is essential for patient care and emergency procedures.
Educational Institutions
Ensures safe evacuation paths in schools and universities during emergencies with 90 minutes of reliable backup power.
Industrial Plants & Warehouses
Rugged design withstands harsh environments while providing emergency lighting for hazardous areas and manufacturing facilities.
Retail Stores & Shopping Malls
Maintains emergency aisle lighting and exit signage to guide customers to safety during power failures.
Public Transportation Hubs
Essential for airports, subway stations and bus terminals where continuous lighting is critical for passenger safety and evacuation procedures.
Hospitality Industry (Hotels & Resorts)
Ensures guest safety by maintaining emergency lighting in corridors, lobbies and fire exits during power disruptions. The self-testing feature provides automated compliance with safety regulations.
Residential High-Rise Buildings
Critical for apartment complexes to illuminate stairwells and common areas during blackouts. The 90-minute runtime exceeds most building code requirements for residential emergency lighting.
Q1: Are you a factory or a trading company? Where is your company located?
A1: We are 100% a factory, not a trading company. Our company is located in Dongguan, between Shenzhen and Hongkong Guangzhou, China.
Q2. How about the lead time of LED Linear High Bay Light ?
A2: 3-7 days for sample order, 15-25 days for mass production order base on order quantities.
Q3. Can I have a sample order for LED Tri-proof Light ?
A3: Yes, sample order to test and check quality is welcomed. Mixed samples are acceptable.
Q4: How do you ship the finished production ?
A4:By SEA, AIR or Express(DHL,UPS,Fedex,TNT,etc) are optional.
Audited Supplier 
){kind=link}