| Customization: | Available |
|---|---|
| Type: | Ultra High Intensity |
| Emitting Color: | White/Red/Customized |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Light Source |
Ultra high intensity LED
|
| Available Colors |
Green, Yellow, White, Red, Blue, IR
|
| Intensity(cd) |
ICAO standard
|
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) |
ICAO standard
|
| Flash Characteristics |
Steady burning
|
| Operation Mode |
24hours operation
|
| LED Life Experience(hours) | >100,000 |
| Electrical Characteristics | |
|
Operating Voltage
|
DC48V and AC(110-240VAC), DC12V
|
|
Power(W)
|
5 |
|
Circuit Protection
|
Integrated
|
|
Physical Characteristics
|
|
|
Body Material
|
UV protected Polycarbonate
|
|
Base Material
|
Powder-coated Die-casting aluminum
|
|
Mounting
|
140×140×θ12(Installed on heliport)
112×112×θ12(Installed on helideck)
|
|
Dimension(mm)
|
190×165×166 (Installed on heliport)
173×133×102(Installed on helideck)
|
|
Weight(kg)
|
1.9 or 1.5
|
|
Product Life Expectancy
|
≥10 years
|
|
Environmental Factors
|
|
|
Ambient Temperature(ºC)
|
-55~70(ºC)
|
|
Humidity
|
10~90%
|
|
Wind Speed
|
80m/s
|
|
Waterproof
|
IP66
|
|
Compliance
|
|
|
ICAO
|
ICAO Annex 14 Volume 2 Heliports 5.3
|
|
Options Available
|
Infrared LED compatible for NVG (Night
Vision Goggles)
VHF Pilot to Ground Remote Control
Light intensity adjustable
|
| Model | Application | Emitting color | Beam angle |
| MF-HP-E-TLOF(L) | Touchdown and lift-off area lighting | Green | omnidirectional |
| MF-HP-E-FATO(L) | Final approach and take-off area lighting | White | omnidirectional |
| MF-HP-E-IR | Heliport Lighting | Infrared | omnidirectional |
| MF -HP-E-TA(L) | Taxiway Light | Blue | omnidirectional |
| Application | Vertical Degree(° ) | AH-HP-E Average Light Intensity(cd) | ICAO Standard |
| Touchdown and lift-off area lighting | 20° <E 90° | 27.1 | 3 |
| 13° <E 20° | 54.6 | 8 | |
| 10° <E 13° | 50.5 | 15 | |
| 5° <E 10° | 44.6 | 30 | |
| 2° E 5° | 38.4 | 15 | |
| Final approach and take-off area lights | 0° | 83.1 | 10 |
| 3° | 106.7 | 100 | |
| 10° | 145.2 | 100 | |
| 20° | 163.9 | 100 | |
| 25° | 182.2 | 50 | |
| 30° | 180.5 | 10 |
MF-MI-BF medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 45-150 meters, and most time work with low intensity lights installed on the lower place
1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst
FAQ:
Are you a manufacturer?
Absolutely, we are a professional manufacturer with 16 years of experience.
Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.
What is your main product?
Our main products are as follows:
LED Triproof lights/ LED Vapor Tight Lights
LED High Bay Lights
LED Flood lgihts
LED Explosion Proof Lights
LED Down Lights
LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
LED garden spot/spike lights
LED inground lights
What is the minimum order quantity (MOQ)?
For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.
What are the payment options?
We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP
What is the delivery time?
The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.
How are the products packaged?
Each piece is packed in an individual color box and then placed in a strong master carton.
Why should you choose us?
1). We offer OEM/ODM services.
2). We have our own design team.
3). We offer high-quality products at reasonable prices.
4). We have no MOQ request.
5). Our sales team has 12 years of experience in underwater lighting.
){kind=link}