Factory Price IP66 UV Protected Polycarbonate LED Solar Powered Medium-Intensity Aviation Obstruction Light

• Customization: Available
• Emitting Color: Red(Other Color Is Optional)
• IP Rating: IP66
• Model NO.: MF-MI-B2S
• Certification: CCC, CE, RoHS
• Light Source: CREE High Intensity LED
• Base Material: Powder-Coated Die-Casting Aluminum
• Weight(Kg): 5(Battery & Solar Panel Included)
• Product Life Expectancy: 10years (Battery 3-5years)
• Humidity: 10%-95%Rh(No Condensation)
• Wind Speed: 240km/H
• LED Life Experience(Hours): >100,000
• Trademark: MF
• Origin: China
• HS Code: 9405429000
• Production Capacity: 5, 000PCS/Month

Product Description

Factory Price IP66 UV protected Polycarbonate LED Solar Powered Medium-intensity Aviation Obstruction Light 

Product Description

This LED Medium-intensity Aviation Obstruction Light emitting red color (white color is optional), designed for marking top of obstacle which height is more than 45meters.

Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance.

Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.

 

Compliance

 

 

*ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium

Intensity Type B / C Obstruction Light
 

 

*FAA L-864, FAA L-885
 

 

*CAAC MH6012-2015 Aviation obstruction light, MH 5001-2013

Aerodrome technical standards

 

Features

Electrical

 

*CREE ultra-high intensity LED as light source saving power consumption and maintenance than incandescent or halogen lamp
 

Physical
 

*Unique design and UV protected polycarbonate reflector for converging light
 

 

*UV protection Powder coated bright yellow color base make better visibility
 

 

*Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection
 

 

*Special vent installed under base to make sure the air could go through but water is avoided, so that the whole light temperature won't be high, to avoid the High pressure steam goes inside.
 

 

*Self-contained without external power supply, Cable cost saving & cabling job saving, nice & easy installation
 

 

*Battery: Lithium ion battery for long life

System design

 

 

*Built-in photocell for day/night operation (dusk to dawn operation)
 

 

*Surge and lightning protection
 

 

*GPS device inside for flashing synchronously

Optional

 

 

*Dry contact Alarm output for remote monitoring
 

 

*Other Flashing rate (20, 30, 40, 60, Steady mode)
 

 

*Infrared LED for pilot using NVG
 

 

*Sequentially flash

 

Configuration

Solar Module Type	Mono crystalline Silicon
Charging Regulation	Microprocessor controlled
Battery type	Lithium ion battery
Mounting	190×190×θ12
Dimension(mm)	500×480×303 (Light+battery+solar panel)
Circuit Protection	Integrated
Operation Mode	Dusk-to-dawn Automatically as standard.

  

Remark: The first line is the factory setting if no special request.

 
 
 

Dimension

 

 

 

Photometry

 

Application

Solar medium-intensity light is specialized used on the top of the High Chimney, Wind Turbine, Telecommunication tower, where there is no cable power supply and those facilities which have high requirements on lightning protection, and most time work with low intensity lights light installed on the lower place.

 

Packaging & Shipping

 

Certifications

Company Profile

 

FAQ:

Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED  Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED  Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.