Factory Price Kingfisher-1 Ultra HD Shapeable Track Projection Light with Multi-Layer Optical Filters for Precision Lighting in Museums and High-End Retail

Product Description

Factory price Kingfisher-1 Ultra HD Shapeable Track Projection Light with Multi-Layer Optical Filters for Precision Lighting in Museums and High-End Retail

Specifications

Product Name:	T1008L
Item Type:	Shapeable Track Light/Led Track Light/Led Spot Light
Wattage:	10W
LuminousFlu:	300-350LM
Support filters	58
Input voltage:	220-240V
Light Source:	Os-ram
CRI (Ra>):	97
Housing colour:	white,black
Installation:	Track-Mounted,Wall-Mounted
Working Time:	50000 hours
Warranty:	5  years

Product Parameters

GZ series shapeable track light features a compact design, with dry mechanical damping system. It achieves stable and reliable front and rear zoom, spot shaping and projection, ultra-high cost performance, very suitable for the current new commercial lighting design and no main lamp design. Its photo electric performance is the same as DQ Series.

DIP color temperature coupled with the single lamp knob dimming design can easily achieve single lamp dimming, spot shaping and color temperature adjustment. It can be used alone or can alternatively be equipped with other dimming devices.

Detailed Photos

Color filter : The luminous color of the lamp can be adjusted according to your needs.
ND filter: With electronic dimming, the small-angle illumination can be reduced to less than 75LUX, which is generally used for authentic lighting.
UV filter: It can effectively filter UV rays in LED lamps and lanterns, thus protecting the illuminated object. It delivers superior performance in silk products lighting and cultural relics lighting.

CPL filter: It can eliminate the reflection of the object's surface so that the object in a high luminosity environment can also display its original appearance.
GND filter: GND filter are used to alter the light ratio into the lens. For example, in illuminating the oblique side of the square position of the object, the use of gradient filters allows the even and constant illumination of the object.

Features

Cold forging integrated radiator design
A radiator made of 1070#pure aluminum and molded by molding pressure.
It has high thermal conductivity, low-temperature differences, low light failure, and long service life.

Thermal conductivity 226W/m.K

360° manual rotation design
Loosen the manual screw and turn the lens to achieve the 360°spot rotation adjustment function.

Device to solve the 360° rotation of the projection and light spot.

High-definition optical lens design
It is formed by a plurality of high-definition coated optical lenses. The whole lamp has the characteristics of high luminous efficiency, high spot uniformity, minor distortion, extensive linear zoom range, good spot cut-off line, etc..

A new optical path specially designed for COB light sources.

Optical-grade variable aperture design
An optical diaphragm made of high-precision special material with no
blurring and freezing.
Manual insertion and removal of the light cutting device can freely change the shape of the spot.

Multi-layer dry damping design
The invention is a focusing device not requiring the application of lubricating oil and has a silky feel. It is stable, reliable, wear-resistant, resistant to high temperatures, and does not wear off after extended use.
Rotating the device can change the sharpness of the spot.

Multi-layer dry damping design
Short stroke, considerable focal length, high short-focus and long-focus
recognition, visible to the naked eye, linear zoom is enhanced and more
convenient.
Rotate the device to adjust the spot size.

Application

Luxury Retail: 20° narrow beam highlights jewelry/watches, CPL filters eliminate glare, 2700K for ambiance.
Museums/Galleries: UV filters protect paintings/manuscripts, 36° wide flood for display cases, CRI≥97.
Fine Dining: Shapeable spots (circle/square) for brand logos/food close-ups, ND filters adjust softness.
Stages/Theaters: Instant change 15° spot to 36° wash, silent operation during performances.
Medical Labs: Flicker-free + UV-free for anatomy tables/precision instruments.

Installation Instructions

I. First loosen and pull out thehand screw (red part) shown inFIG. 1, and then pull out themain part of the lens (bluearea) and separate it from thelamp body: Figure 2 shows thepart of the optical lens afterseparation, and Figure 3shows the part of the lampbody after separation.

Il. Stretch the four diaphragmsheets on the optical lens ofFigure 4 outward to themaximum extent as showm inFigure 5.

IIl Uns crew the blue part ofthe optical components at thebottom of the lens in Figure 6and separate it as shown inFigures 7 and 8.Then separatethe lens face ring in FIG. 8 asshown in FIG.9.

IV. Find the gobo devicedelivered by the manufacturer(the red part in Figure 10),install the gobo device asshown in Figure 10, and thenreinstall the optical lens asshown in Figure 11, and thenreinstall the lens as shown inFigure 6, and then reinstall thelamp body as shown in Figure1. The LOGO lamp assembly iscomplete.

V.You can design and make avariety of image gobo. Thespecifications are shown inFigure 12.
 

Adjust the aperture to the appropriate size, and facing the center of the irradiated object, adjust the sharpness to a reasonable degree, as shown in Figure 17.

Pull the four diaphragm sheets outward to the maximum, and then push one by one vertically inward, to ensure that the cut square spot is smaller than the object to be illuminated, and adjust the sharpness of the aperture again until satisfactory, as shown in Figure 18.

If the shape of the spot does not match the object to be illuminated, first loosen the hand screw at the red mark, rotate the blue part of the lens, adjust the edge of the spot to be parallel to the edge of the object to be illuminated, and finally tighten the hand screw. As shown in Figure 19, the LOGO projection direction not matching can also be adjusted to the ideal direction using this method.

Stretch the diaphragm sheet one by one outward  until the spot size is substantially consistent with the object, as shown in Figure 20. If you are not satisfied with the effect, it is recommended to repeat the operation according to the above steps to bring up the spot effect you are happy with.

 

Company Profile

FAQ

Q1: Are you a factory or a trading company? Where is your company located?
A1: We are 100% a factory, not a trading company. Our company is located in Dongguan, between Shenzhen and Hongkong Guangzhou, China.

Q2. How about the lead time of LED Linear High Bay Light ?
A2: 3-7 days for sample order, 15-25 days for mass production order base on order quantities.

Q3. Can I have a sample order for LED Tri-proof Light  ?
A3: Yes, sample order to test and check quality is welcomed. Mixed samples are acceptable.

Q4: How do you ship the finished production ?
A4:By SEA, AIR or Express(DHL,UPS,Fedex,TNT,etc) are optional.