3years Warranty LiFePO4 LED High Bay Lgiht Explosion Proof Light 15W 3h 20W 2h 30W 1.5h Emergency Powerpack Ballast Kit Driver for Factory Warehouse

Product Description

3Years Warranty LiFePO4 LED High bay Lgiht Explosion proof Light 15W 3H 20W 2H 30W 1.5H Emergency Powerpack Ballast Kit Driver For Factory Warehouse

Features

self-detect
constant power emergency output
apply to constant current driver external lighting products
LiFePO4 using together
battery: over-charge/discharge
protection and short circuit protection
working environment: temp.: 0 to 60ºC
IP65 standard
not suitable for high risk lighting environment
Accessories: integrated waterproof button and indicator light, remote control
3years warranty

Design

Specifications

 

 

Input voltage	100-277 Vac 50/60Hz
Input current	100mA max
Charging power	5.0W Max
Power factor	>0.5
Charging current	0-350mA Max.
Charging time	≥24Hours
Emergency output Voltage	DC100-260V,DC300V Max
Emergency output Current	58-150mA/ 75-200mA/115-300mA
Emergency power	15W-3H/20W-2H/30W-1.5H
Battery capacity	LiFeP04/32700/6000mAh-9.6V
Case temperature	tc 60ºC Max

Wiring Diagram

Dimension

LED and test button status:

LED INDICATOR

Green breathing pattern:charging mode

Green stable: battery fully charged

Red flashing: failure as below

Red flashing Once per second: Battery is not connected

Battery is defective

Red flashing four times a second :Load failure during emergency mode,

open circuit/short circuit
Green flashing: Emergency status one per second

 

Remote contorl:

1:0S<Key ON ≤1S,Enter a simulated state of emergency,the green indicator blinks

once every second
2:0S<Key OFF ≤1S,In simulated emergency situations, return to the normal charging state
3:0S<Key OFF ≤1S,In the emergency state, the emergency state is turned off

Sele-test:

when emergency driver is on power,every 180 days± 1 day
automatically enter the emergency state,emergency duration

until the battery is discharged,then return to power-on status.

Installation and Notifications:

1:If it is used for the first time or it does not enter the normal working

state after being over-discharged, it is necessary to connect the main power

to activate the emergency power supply and charge it for 24 hours.

Please use the original emergency battery provided

2:When installing and using it, please keep it away from heat sources and only use

it within a certain working temperature range.
3:Should be stored in a cool, dry environment.
4:After prolonged storage, recharge at least once every 6 months as needed.
5:Emergency driver testing must be longer than 1min, don't press the testing button frequently

 

Applications

• 
  Street Light High Bay Light Panel Light Downlight Tri-proof Light (Waterproof/Dustproof/Corrosion-proof Light) Magnetic Light Exit Sign Light Flood Light Explosion-proof Light General-purpose LED Fixtures Troffer Light Bulkhead Light Bathtub (Recessed) Light Track Light Recessed Spot Light Wall Pack Light Canopy Light Tunnel Light Batten Light Cove Light Linear Light Architectural Light Surface-mounted Ceiling Light Ceiling Panel Light Parking Garage Light

  Common Use Scenarios for Emergency Lighting

  Emergency drivers are used to maintain lighting during power outages, ensuring safety and visibility. Here are typical scenarios:

  Commercial & Office Buildings

  Emergency exit pathways Hallways and stairwells Lobbies and elevators Conference rooms

  Industrial Facilities & Warehouses

  High bay lighting for production lines Emergency lighting in hazardous zones Loading docks and storage areas
  

  Hospitals and Healthcare Facilities

  Operating rooms and patient areas Emergency exits Hallways and emergency departments

  Educational Institutions

  Classrooms and laboratories Evacuation routes Libraries and dormitories

  Hospitality & Retail

  Hotels, malls, supermarkets Emergency exits and corridors
  

  Transportation Hubs

  Airport terminals Metro and railway stations Parking garages

  Public Infrastructure

  Tunnels and underpasses Government buildings Utility plants

  Outdoor & Urban Areas

  Street lighting for emergency evacuation Parks and pedestrian zones Emergency lighting in flood-prone areas
  
  

FAQ:

1. Are you a manufacturer?
   Absolutely, we are a professional manufacturer with 16 years of experience.
   Our products include IP67 waterproof recessed lights, aluminum garden outdoor landscape lighting, inground buried lamp, and LED underground lights.

2. What is your main product?
   Our main products are as follows:
   LED Triproof lights/ LED Vapor Tight Lights
   LED High Bay Lights
   LED Flood lgihts
   LED Explosion Proof Lights
   LED Down Lights
   LED underwater lights (swimming pool lights, fountain lights, underwater spotlights)
   LED garden spot/spike lights
   LED inground lights

3. What is the minimum order quantity (MOQ)?
   For customized models, samples should be prepaid. We offer free customized models if the order quantity is more than 1000 pieces.

4. What are the payment options?
   We accept T/T, Western Union, Paypal. Payment terms are 50% advanced payment and 50% balance payment. Our shipping terms are EXW, FOB, and CIF, CNF and DDP

5. What is the delivery time?
   The delivery time is about 5-7 working days for samples and 20-30 working days for mass production, depending on the quantity.

6. How are the products packaged?
   Each piece is packed in an individual color box and then placed in a strong master carton.

7. Why should you choose us?
   1). We offer OEM/ODM services.
   2). We have our own design team.
   3). We offer high-quality products at reasonable prices.
   4). We have no MOQ request.
   5). Our sales team has 12 years of experience in underwater lighting.